OK, I need help with this one. Turn key switch on , no codes. Step on foot switches the ED1 contactor pulls in 1 second later the contactor drops out with a 356 code. Fuses are good and have been replaced, just in case. ED1 contactor has been replaced. wiring checks good. The # 3 &4 access have been replaced with known good ones. Infopoint book stops there. What if anything am I missing? Please give me some answers.
Showing items 1 - 5 of 5 results.
RDDOG What was the final solution for this issue? Curious what the resolution was? We're experiencing the same issue. Post back the resolution if you found it. Thanks!
try replacing the power fuse with known good one, as sometimes they test ok but fail under load
Does the battery volts come back up after ED drops back out or before. IF available try another battery.
Batt, it may have a reading of 36v but drops as soon as ed comes in momentarily, then reads 36v again
What voltage do you get at the battery when ED pulls in?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.