Cuts out when Plugging no brakes - Technical Troubleshooting discussion in Forkliftaction's forums

Raymond 20IR30TT:
Cuts out when Plugging no brakes

Having a problem with a 20IR30TT serial 020D-93-34790. When the lift goes into plugging mode the lift will not move forward or reverse and brake will not come on to stop the lift, even when foot is taken off the dead man.. Turn key off and back on to reset and it will work for a while. Intermittent. I replaced the handle assembly, Rec 3, scr 1, all bad contact tips, electrical control card. Any sugestions would be a great help. I have been chasing this for a long time.

Posted 11 Jul 2013 22:10
Discussion started by brad_b
Minnesota, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

the deadman brake is composed of a hydraulic master cylinder and a slave cylinder as well as a drum brake. it must not work ever not just when it doesn't plug.

Posted 16 Jul 2013 08:21
Reply by stam
Ontario, Canada

Post a Reply Report this post

the brake switch sometimes gets bad on these and causes weird problems, also poor connections on power cables/buss bars. scr # 2 or # 3 is for plugging, cant remember which one sorry. i will check and get back to you.

Posted 16 Jul 2013 08:13
Reply by stam
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.