No operation - Technical Troubleshooting discussion in Forkliftaction's forums

Raymond 537-CSR30:
No operation

When powering up unit it is staying in self test on the display. There are no codes being displayed and will not operate. This unit is new to us. Any help will be appreciated.

Posted 3 May 2013 06:18
Discussion started by Kono
Alberta, Canada

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Did any cables get damaged?Check key switch,if good most likey firmware or bad managers

Posted 4 May 2013 03:06
Reply by hayward_a
California, United States

Post a Reply Report this post

Do you have the superword?
Self test is checking all the devices and communications between the unit controllers. You will need to read the codes on the controllers as it goes through self test. It could be something so simple as a bad or out of adjustment foot pedal switch, to a blown fuse to a bad vehicle or carriage manager.

Posted 3 May 2013 23:13
Reply by JonG
United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.