1. Home
2. Forums
3. Technical Troubleshooting
4. Raymond
5. 740-R35TT

Raymond 740-R35TT:
Code G5 issue

We got a truck in this week that pops a code G5. We don'thave any manuals for this model so if anyone could give any direction it would be great. Thanks
Raymond
740-R35TT
S/N 740-07-AA08450

• Posted 1 May 2013 12:36
• Discussion started by RAFARMER
• Texas, United States

rafarmerjr@gmail.com

Post a ReplyReport this post

Check battery, under load, no shorts to frame.
Check K2 relay. remove it and verify all the female pins on the fuse card are snug and not discolored. look very closely at them, remove all relays and compare pins.

• Posted 12 May 2013 14:07
• Reply by EasiTek
• Ontario, Canada

Post a Reply Report this post

see my message posted on tech arena who knows

• Posted 7 May 2013 19:15
• Reply by electrotech
• Victoria, Australia

Reach for the sky

Post a Reply Report this post

I must of had a dyslexic moment. Sorry all, the code is 5G. This truck has all hydraulic steering with no steer encoder

• Posted 7 May 2013 11:37
• Reply by RAFARMER
• Texas, United States

rafarmerjr@gmail.com

Post a Reply Report this post

G5 is a short in the steer motor encoder. wires from steer encoder could pinched at deadman pedal assembly bracket. When it`s installed, wires can be pinched.

• Posted 7 May 2013 07:45
• Reply by EasiTek
• Ontario, Canada

Post a Reply Report this post

Do you if it had a flag update done?Flag is cut down and VM needs to be flashed

• Posted 4 May 2013 03:10
• Reply by hayward_a
• California, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.