Showing items 1 - 4 of 4 results.
Adelle. check seat switch. Their is also a brake switch under floor board by the brake valve. Check also wires at potentiometer under floor board
Just started getting back on. Not sure where your at with your unit.Let me know
Hi Edward m,
Hope this email finds you well. It seems like you are clued up with forklifts. We have problem with our Linde H40D, with no manual and indication of where to start looking. The forks works well but no forward and reverse. Can we please get assistance or any indication please.
Might check under floor board and remove cover to pedal linkage. Rod that goes through pedals will shift. If you can get it hooked up to a laptop you can go to imput /outputs and jack up one side of drive wheel and when pressing pedal forward or backward, wheel should start turning when voltage gets to 460 milliamp. its a start
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.