Hi,
I'm looking for a copy of the workshop service manual for a Hyster P2.0S (C439) and also if possible a list of the error codes.
Is this something anyone would be able to help me with?
Many thanks for your help in advance.
Showing items 1 - 12 of 12 results.
Hi
I'm having problems with a P2.0.
Drives well then stops suddenly and error code 39 on gauge any ideas ?
Thanks Gary
OK awesome. Thankyou battery is good and only 12 months old. All wiring seems OK for a hyster lol. Was thinking controller tbh. Had similar fault on a reach truck but have to check. Thankyou for your help
Code 8 is a watchdog error. If you have good battery voltage and the wiring is intact it probably needs a new controller.
Different truck from the previous guys though. See the feed and hoped someone could help as main dealer isn't getting back to me
Yea it's a p2. Os serial no. A439x0165su. It's not driving. Brake not releasing. When butterfly is moved direction contactor comes in then immediately drops out followed by 8 flashes on the red Led on the silver controller
what problem/error are you having with your unit?
is this for the same unit
Hi guys. Anyone know what 8 flashes in the controller indicates. Drive contactor comes in then drops out followed by 8 flashes of red Led
Email now in profile. Thanks.
My previous message shows the email as being removed, but please let me know if it has been removed from the message sent - I'll resend.
Thanks again.
[email address removed]
Many thanks for your reply and help in advance.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.