1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Ignition module

Discussion:
Ignition module

Customer has a 2001 Hyster H40XMS. No start, no spark. No signal from ignition module. Distributor was corroded and rusty. Replaced distributor with OEM, replaced coil from NAPA. Engine ran 2 days. No spark, replaced coil with OEM. One day, no spark. No signal from module. Replaced ignition module with OEM. Ran one day. Ignition module out again. What could be taking out ignition module?
  • Posted 1 Jul 2014 22:48
  • By philperro
  • joined 26 Jun'08 - 6 messages
  • Michigan, United States
Phil Perro
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
Also check your grounds. Make sure the engine is grounded to the chassis & the chassis is grounded to the battery. I've seen some short cuts where a ground gets left out which can cause issues
  • Posted 4 Jul 2014 06:56
  • By bbforks
  • joined 1 Mar'12 - 1,437 messages
  • Pennsylvania, United States
bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!
Post a ReplyReport this post
What engine is it?? Mazda M420G probably. Check your charging voltage I've seen the alternators on these giving out over 16Volts on a poor battery that would take out the module. Is the module genuine from hyster or some crappy oem (TVH) like part
  • Posted 4 Jul 2014 05:56
  • By lifter01
  • joined 4 Jul'09 - 461 messages
  • West Yorkshire, United Kingdom
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Enforcer FLBAXT25
Enforcer FLBAXT25
Braeside, Melbourne, Victoria, Australia
Hire
UN Forklift FGL18T
UN Forklift FGL18T
HANGZHOU, Zhejiang, China
New - Sale
|
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Movers & Shakers
Jeannette Walker Jeannette Walker
Jeannette Walker
CEO, MHEDA
Stéphane Hénon
President, European Rental Association (ERA)
Tejal Ranjan
Chief marketing officer, JLT Mobile Computers
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
Last Week's Most Read
edition #1236 - 26 June 2025
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Last Week's Most Read
edition #1236 - 26 June 2025
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".