Ol nuno!
pode entrar em contato comigo?
podemos trocar informaes
meu skype:hyster.brasil

hi
Many thanks i will try this, you are the best.

Regards

RRE is totally different to navigate for service menus & parameters to the older BT machine's.

Truck OFF

Connect BT can service key

Press I button on CID, use arrows to highlight TICK box, press green button, now use arrows to highlight PAR box & press green button.

Type 101 in the top box & press green button, use down arrow to move to the bottom box & change value to 0 to turn off service reminder, press green button to save it.

Remove BT can service key, remove the battery isolator plug for 1 minute.

Job done.

Be WARNED: The BT can service key opens up a lot of hidden service menu's on a RRE, DON'T go in to any other screen's / change any other setting's! You can seriously do a lot of damage to the trucks calibration if you fiddle with the wrong settings with the can key attached!

HI
I dont have especific training of this machine, but i work with varios sistems : jungheinrich, linde, zapi, sevcom, curtis, etc and i know my way around, all i need is to know how i enter with can key in the menu, if is like bt pallet staker we have to do and combination with the bottons, can you help me with that? sorry by any word that is wrong but english is not my first language.

Thanks and regards

Unless you have been on the RRE training course I would strongly advise NOT to plug the can key in, it's very easy to end up doing serious harm to the truck's setting's if you don't know what your doing!