1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Proper pressure Nikki regulator on a Cat?

Discussion:
Proper pressure Nikki regulator on a Cat?

I was wondering what the pressure should be when testing a Nikki regulator on a Cat C5000 AT90 with a K25 motor? Thanks
  • Posted 31 Oct 2013 05:47
  • By mrfixit
  • joined 11 Dec'08 - 1,434 messages
  • New York, United States
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
Should run around 4.5 to 5 PSI.......I test them at idle and then at tilt bypass(loaded)


this here is right from the manual......Check pressure of pressure gauge at idle after warming up. Standard: 30.7 - 33.1 kPa (0.30 - 0.33 bar, 0.313 - 0.338 kg/ cm2, 4.4 - 4.8 psi)
  • Posted 31 Oct 2013 07:44
  • Modified 31 Oct 2013 07:54 by poster
  • By kevin_t
  • joined 2 Dec'10 - 1,301 messages
  • Pennsylvania, United States
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
Portugal was the first country to implement a nationwide, automatic electronic toll collection system. This system allows vehicles to pass through toll booths without stopping, significantly improving traffic flow on highways.
Special Feature
Read more Special Feature articles
Fact of the week
Portugal was the first country to implement a nationwide, automatic electronic toll collection system. This system allows vehicles to pass through toll booths without stopping, significantly improving traffic flow on highways.

Showcased in the Virtual Expo

Global Industry News
edition #1244 - 21 August 2025
In our feel good story for the week, we report on a donation from Wisconsin-headquartered Big Forklifts to the University of Wisconsin-Madison’s College of Engineering, after discovering the institution was still using one of its 1960s walkie stackers... Continue reading
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ