CAT 2EC20 S/N A2EC261856 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
CAT 2EC20 S/N A2EC261856

Error code 60 has new logic card and new motor brushes. truck runs great. did noticed someone added a red wire to f2 post on motor to activate the driver card. does someone have a full schematic on this truck.

Posted 20 Aug 2013 04:31
By ben_g
joined 12 Feb'08 - 60 messages
California, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

The truck drives and lifts normal from time to time code 60 pops up then stays on but truck operates normal.

Posted 21 Aug 2013 10:28
By ben_g
joined 12 Feb'08 - 60 messages
California, United States

Post a Reply Report this post

Microcommand

Posted 21 Aug 2013 07:55
By ben_g
joined 12 Feb'08 - 60 messages
California, United States

Post a Reply Report this post

Display = 60 : (!) action light flashing: no lift truck operation. Line contactor closes then opens.
The description of the code indicates that there is a problem with the serial communication between the dash display and the logic.
You either have a bad connection in the harness to the display, a bad connection at one of the plugs or a bad display or ultimately a bad logic.
There are no spk's out on this code.
This is based on if this truck has microcommand
Do you know if its microcommand or EV100ZX controls?
The EV100ZX troubleshooting codes do not include a code 60 so i went on the assumption this was microcommand.
;)

Posted 20 Aug 2013 20:54
Modified 20 Aug 2013 20:54 by poster
By Jplayer
joined 12 Apr'07 - 407 messages
North Carolina, United States

John Player Jr
_________________
LiftOne, LLC
Charlotte, NC
Email: jplayer@liftone.net

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.