ev100 code 48 crown rc3000 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
ev100 code 48 crown rc3000

codeing 48 when plugging slowly replaced 3 rec and 23 snubber swapped any help thanks

Posted 17 Jan 2013 10:38
By rick_o
joined 7 Nov'08 - 33 messages
Pennsylvania, United States

roswaldheritage@hotmail.com

Showing items 1 - 3 of 3 results.

Sort messages by:

Does sound like a contactor issue due to happening when plugging. Also check under the 2 middle snubbers there is a connection between the capacitor and the choke which can also go loose (usually throws up different error though) but worth a check.

Posted 18 Jan 2013 22:16
By elektrodrive
joined 2 May'08 - 740 messages
West Midlands, United Kingdom

enquiries@elektrodrive.co.uk

http://www.facebook.com/pages/Elektrodrive/135894223166624

Post a Reply Report this post

Hi rick
check normally open contacts (thats not welded)
check impedance between NEG & T2 points (thats not low impedance)
check 4REC diode & 24 snubber filter
regards

Posted 17 Jan 2013 21:59
By makan_j
joined 14 Apr'11 - 17 messages
Tehran, Iran, Islamic Republic Of

Post a Reply Report this post

You did what Ge code says. But try to be unconventional. Make sure normally closed F/R contacts are good and conducting.

Posted 17 Jan 2013 12:55
By ivan_j
joined 16 Feb'11 - 65 messages
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.