I have a Gregory RSC4EX, the unit has four wheel brakes. All brakes built by Knott. I have all the numbers possible off of the brakes and backing plates. I cannot find a source for wheel cylinders or wheel cylinder kits. The factory in New Jersey will not return my calls. Anybody know where to get parts for Knott brakes. I am being told that they are made in Germany.
Thanks
Showing items 1 - 6 of 6 results.
The parts are readily available at the Gregory manufacturer in NJ. Please call 973-808-8399 x106 for the parts department and provide the serial number of your truck when inquiring for the parts.
Thank you.
Excalibur Miretti Group
Maybe you can try Excalibur at www dot exequipment dot com
They are in Fairfield NJ.
trying to deal with the component mfg's is almost impossible since they generally do not deal with the end users, they are usually propriatary to the mfg's only.
if you need help with this you are stuck dealing with the dealership.
Of course if your lucky you MIGHT find a retailer that deals with these components but good luck finding one.
That is really strange as they have been very helpful in the past.
The only dealer I could find is Bell Forklift.
www dot bellforklift dot com
I have struck out with Knott in Lodi Ohio, they sent me to someone in Germany and that has been a dead end
Knott has a facility here in the US www dot knottbrake dot com
based in Ohio.
They should be able to help you out or point you in the direction of one of their distributors.
Very prompt and easy to work with.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.