Please help has any one got a servive manual for a boss pe25
keeps coming up with h.03 and cuts the hydraulic motor.
thank you in advance
email bobajob32athotmail.co.uk
Showing items 1 - 7 of 7 results.
HI gc_d thank you for your help i found the wiring faulty on the hydraulic levers before and that explains why i had that error code as they were shorting
if you have a manual on this truck or a list of error codes that would be much appreciated
regards bobajob
H03 , The lifting puls control was permanently switch on for more than 5 minutes,
check the potentiometer of the lift lever it goes fully back if the handle in neutral.
It is a truck with two bosch controllers i mean?
hi gc_d thank you but u sent me a manual for a jungheinrich
I was looking for a boss pe25 trying to work out what error code h.03 is
sorry Andy Pandy not sure what controller it is. have fixed truck it was wiring fault but would like to check what the error code was to make sure it hasnt got a second problem as the customer said the code was random and not related so far error code has not came on since repair
thank you in advance
i have send again with a download file
What controller is fitted? LT200?
Thank you for trying but i havent recieved any mail
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.