YUASA EXIDE WORK HOG
M/N W3-18-680
S/N W196759
Part# W3-18-680B
Charger is wired for 3ph. Is there a way to rewire to operate on 1ph. 220/240Volt.
Showing items 1 - 7 of 7 results.
You can not run a 3 phase charger on single phase period. The only thing that you can do is to buy a phase converter which changes your single phase power to 3 phase.
You can run a single phase charger on 3 phase however by only only using two wires plus the ground.
can be done, not very economical to use
IF it has 3 transformers you rewire them so they each are powered by the 2 legs of the single phase. Make sure the voltage taps for the transformers and contactor are set for 240.
Thank You, any ideas would be appreciated, trying to impress the boos
I believe you would have to change the transformer in the charger to do this
Yes you can. But, I can't tell you how.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.