Discussion:
LINDE E25 01 336G0201622 Year 1996

I have a problem with this fork lift truck.
The hydraulics and the servo work, but does not move back and forward. The reversing switch
alternates the mark on the front page instrument, but at the back the contactors they do not stir for a moment. This is onepedal version.
Prodding the brake pedal the capital kontaktor off-on
gets it, but besides nothing. Apparently it's okay, the 24V got it. There is not a diagnostic socket on this. There would be need for a service documentation in order for me to be able to measure something actually.
Best regards, Laci
  • Posted 30 Oct 2010 17:56
  • By LACI
  • joined 24 May'09 - 195 messages
  • Serbia
Showing items 1 - 3 of 3 results.
I say thank you the answers, today afternoon I go to look at the fork lift truck again. I do not have real service description yet, which would be very good,. I repaired this fork one many times already, I know it, but acts as very other one now.
I try to measure the sensors out one by one.
Regards, Laci
  • Posted 2 Nov 2010 14:43
  • By LACI
  • joined 24 May'09 - 195 messages
  • Serbia
We had a problem with a linde a few months ago the system had a shunt wound motor so no direction contactors. However the problem was all hydraulics perfect but no traction and we found in the end the dead man emergency power switch had an additional switch inside which switches light wire feeds to the system and that was faulty as when the switch was bridged out the truck worked fine.

Worth having a look :)
  • Posted 2 Nov 2010 04:19
  • By elektrodrive
  • joined 2 May'08 - 739 messages
  • West Midlands, United Kingdom
Hi Lacy,

check your mail, send you the information i have.

Regards
  • Posted 31 Oct 2010 10:24
  • By nacsand_n
  • joined 20 Sep'09 - 716 messages
  • Madrid, Spain

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
TOC Europe wraps up Rotterdam, Netherlands
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading