HAVE A NISSAN MODLE MUGL02A30L THAT HAS A BROKEN WIRE TO THE ENGINE AIR FLOW SENSOR. THE WIRE IS BROKE OFF EVEN WITH THE BACK OF THE 5 PIN PLUG THAT PLUGS INTO THE SENSOR. NEED TO REPLACE THE PLUG. IT IS NOT A MOLDED PLUG SO IT SHOULD BE AVAILABLE FROM SOME WERE BUT HAVE BEEN ABLE TO FIND IT. DO NOT SEE THE NEED TO REPLACE A COMPLETE HARNESS WHEN ALL IT NEEDS IS 1 WIRE REPAIRED IN 1 PLUG. DOES ANYONE HAVE ANY IDEAS AS TO WHERE TO LOOK FOR A VENDOR THAT CAN SUPPLY THIS PLUG
Showing items 1 - 5 of 5 results.
I know this question was from back in August but Kent-Moore makes the harness and terminal repair kits for Nissan automotive dealers. Their part number J-48817-201 is the pin with wire attached that will repair your MAF connector. You can Google Kent-Moore or Nissan Techmate for contact info or maybe see a Nissan car dealer who might have the complete kit on hand.
Done
[email address removed]
do you have an e-mail, if so please add it to your profile.
Have checked with both Finning the local CAT equip dealer and Leavitt the local MCF dealer. So it looks like the local Toyota dealer on the outside chance may know of a suppier through an automotive dealer
have you tried tha local Caterpillar lift truck dealer? I know at one point the MCFE guys had a pretty complete listing, but I don't know if they ever shared that info with the MCFA people.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.