Jungheinrich ETV 325 , s/n: 91009061 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Jungheinrich ETV 325 , s/n: 91009061

I'm looking for info on the park brake. I'm having problems with mine not holding.
As soon as i switch the machine on the brake releases, but after a second it engages again.
Help please!

Posted 9 Jul 2010 00:15
By riaan_s
joined 14 May'10 - 2 messages
Western Cape, South Africa

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Hi. Any further info?
Regards
Riaan

Posted 15 Jul 2010 23:16
By riaan_s
joined 14 May'10 - 2 messages
Western Cape, South Africa

Post a Reply Report this post

Hi.
I think this forklift has a 2 coil brake device. 1 coil for releasing brake and afterwards 1 coil to hold it released. Sometimes the driver for hold-coil is faulty/burned. Or you have an error on power-steering. Error on power-steering keeps forklift from running and the brake is on for safety reasons. I'm back on monday and I'll look in SH for further info.
Regards, Max

Posted 9 Jul 2010 01:29
By Fittermax
joined 17 Jul'08 - 171 messages
Denmark

Post a Reply Report this post

some times you have to push a button on the dash or just drive the unit. the brake always comes on when the unit is stopped. hope this helps.

Posted 9 Jul 2010 00:55
By jason_v
joined 16 Apr'09 - 20 messages
Florida, United States

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.