EJC Z14 - Error E001 | C146 and C016 | E039 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
EJC Z14 - Error E001 | C146 and C016 | E039

Jungheinrich EJC Z14

Hello everybody,

we seek help for a Jungheinrich EJC Z14. Lift operation is ok, but it does not move forth and back. Probably it is an issue with the controller or motor.

The error codes it shows are:
E001 C146, then
C016 E039

Can anybody give me a hint what is wrong with this machine? Is there a list of error codes available - the manual says nothing about specific codes. Thank you in advance - Paul

Posted 12 Nov 2024 23:56
Modified 13 Nov 2024 18:58 by poster
By Paul_Enker
joined 12 Nov'24 - 2 messages
Austria

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Thank you to Estonia - the google keywords helped a lot!!

Posted 14 Nov 2024 18:54
By Paul_Enker
joined 12 Nov'24 - 2 messages
Austria

Post a Reply Report this post

If you google for jungheinrich system messages, you can decode these E-s are errors, C-s are components.
Common failures are harness wiring in handle bending joint, travel switch potentiometer.

Posted 13 Nov 2024 19:18
By Tanel_M
joined 18 Jun'22 - 90 messages
Estonia

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.