1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. TIMING ORDER

Discussion:
TIMING ORDER

Can anyone give me the fire order of the Mazda d5 engine
  • Posted 25 Oct 2024 04:57
  • By SALVADOR_VARGAS
  • joined 25 Oct'24 - 1 message
  • Mexico
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
The firing order is 1342 same as most 4cylinder engines hope this helps. Note l have seen on some aftermarket caps were the numbers are marked wrong on the cap so do not go by that.
  • Posted 26 Oct 2024 11:37
  • Modified 26 Oct 2024 11:50 by poster
  • By Scott_
  • joined 16 May'21 - 307 messages
  • Pennsylvania, United States
Scott
Post a ReplyReport this post
The firing order is 1342 same as most 4cylinder engines hope this helps
  • Posted 26 Oct 2024 11:37
  • By Scott_
  • joined 16 May'21 - 307 messages
  • Pennsylvania, United States
Scott
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Showcased in the Virtual Expo

From the forum discussions …
"Congrats to the first person to use the new photos in the forums - Darek_S says: "I attached a couple photos of the valves I visually inspected (Toyota 7FBEU20). I followed the pressure line to the flow regulator valve...""
darek_s, United States
Read & Post in our Forums
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Movers & Shakers
Jeannette Walker Jeannette Walker
Jeannette Walker
CEO, MHEDA
Stéphane Hénon
President, European Rental Association (ERA)
Tejal Ranjan
Chief marketing officer, JLT Mobile Computers
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
Taylor XC300M
Taylor XC300M
Morgantown, Pennsylvania, United States
New - Sale & Hire
Hangcha CBD15
Hangcha CBD15 2021
China
Used - Sale
USD1,600
|

Showcased in the Virtual Expo

From the forum discussions …
"Congrats to the first person to use the new photos in the forums - Darek_S says: "I attached a couple photos of the valves I visually inspected (Toyota 7FBEU20). I followed the pressure line to the flow regulator valve...""
darek_s, United States
Read & Post in our Forums
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ