No Forward or Reverse, Motor has Voltage - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
No Forward or Reverse, Motor has Voltage

Crown 30WTL

Hi everyone, first time poster here.

Our Crown WTL Stacker stopped driving last week. The motor still has voltage(25.6V) and the brushes have tons of life left. The lift still works perfectly, and the battery is charged. Any ideas on what could be wrong?

Thanks,

Tanner

Posted 8 Mar 2021 02:24
By Tanner_Wallis
joined 8 Mar'21 - 1 message
New York, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

If you have good battery voltage and your cables and connections are good and the motor brushes are not stuck in the brush holders then try cleaning the motor armature with a comm stone. I see a lot of older trucks with the same problem. The brushes get stuck in the holders and ruin the armature. Also, make sure the brushes can move freely inside the brush block holder.

Posted 23 Jul 2021 05:02
By 1CrownTech
joined 23 Jul'21 - 117 messages
Washington, United States

1crowntechnician@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.