1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. lowering tilt problem

Discussion:
lowering tilt problem

i have seen many posts about units not lowering or tilting. the seat switch open and the unit will travel did anyone figure out what it was and if so a little help would be appreciated. is there a hidden fuse on a 8FGU25
  • Posted 15 Feb 2021 18:10
  • By fish2121
  • joined 5 Mar'15 - 19 messages
  • New Jersey, United States
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
Likely you have corrosion in the system. there is a black control box under the left step. Many wires go to this. it needs to be taken off, under the control box is a white circuit board, here you will find the corrosion. you will need to clean or repair by soldering jumper wire across the corroded circuits.
  • Posted 18 Feb 2021 01:28
  • By Dennis_Heslop
  • joined 18 Feb'21 - 2 messages
  • Illinois, United States
Dennis
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Terberg YT220
Terberg YT220 2004
Balling, Denmark
Used - Sale
Hoist Liftruck F180-36BOX-CAR
Hoist Liftruck F180-36BOX-CAR 2010
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
|
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Latest job alerts …
Road Mechanic
Saratoga, United States
Material Handling Equipment Rental Manager
Indianapolis, IN, United States
Road Technician
Columbia, SC, United States
Logistics & Rental Coordinator
East Syracuse, United States
View more jobs alerts
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
From the forum discussions …
"Congrats and thanks to a Gold Award Tech, DyslexicNerd_01 who writes: "There is no fuse for the lift motor on this (Crown MT20) model of lift. Most likely you burned out the lift/hydraulic motor...""
DyslexicNerd_01, United States
Read & Post in our Forums
TOC Europe wraps up Rotterdam, Netherlands

Showcased in the Virtual Expo

Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".

Showcased in the Virtual Expo

Last Week's Most Read
edition #1236 - 26 June 2025
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".