Hello,
I have code E 61-3 (with blinking spanner) on my Martin cab over 8FGU25. Nowhere inside the service manual does it specify this specific code (ends diagnostic code menu at E 62-3 and starts at E 63-1. Not very helpful. After some digging I found the code specifies "Pressure sensor open abnormally (P-port)." Now that I know what the code is for I looked all over the oil control unit and I cannot find that specific port. Need to verify if pressure is actually low or just sensor fault.
Thanks
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.