The problem is it won't start. The forklift was running 100% fine (except for a fuel distribution problem) and now it's totally won't start. It will start with starter fluid and it has good spark.
In the past I've had a problem with fuel distro. 2 center cylinders run really rich, 2 outer cylinders run normal.
So it seems to be carb issue. Seems to be a one barrel carb.
I bought a rebuild kit, but I am not sure it's right. I also bought a cap and rotor at the same time and the cap was fine but the rotor they sent was totally wrong. So I have a 50/50 chance the kit is correct. The kit they sent was an Mapco H20A H20M, 16010-K9000K
The fork lift is a yale from the 70's. (see model no.)
I don't want to pull the carb off till I confirm I have the right kit or I'm sending it to someone to rebuild who is familiar with the parts.
Thanks
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.