1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Slow reverse travel

Discussion:
Slow reverse travel

Unit works like it should but has slow travel only going reverse. Travels forward and plugs just fine. Checked voltage sweep of the travel POT and its good, The travel POT is not the old style that had the green/brown wires on it but a newer style with three wires. it there a setting in the card to adjust the travel speeds? Dont have any information on this unit so any input greatly appreciated.
  • Posted 1 Feb 2020 05:32
  • By Mark_Stokes
  • joined 1 Feb'20 - 11 messages
  • Colorado, United States
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
99% of the SP3400's in my area have a connection issue at the distribution board. With the truck powered OFF, unplug all the connectors and plug them back in. See if the condition changes. There is a connector update, but the condition is still there....
  • Posted 10 Feb 2020 14:46
  • By Randy_Keilback
  • joined 10 Feb'20 - 5 messages
  • Pennsylvania, United States
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
Portugal was the first country to implement a nationwide, automatic electronic toll collection system. This system allows vehicles to pass through toll booths without stopping, significantly improving traffic flow on highways.
Global Industry News
edition #1244 - 21 August 2025
In our feel good story for the week, we report on a donation from Wisconsin-headquartered Big Forklifts to the University of Wisconsin-Madison’s College of Engineering, after discovering the institution was still using one of its 1960s walkie stackers... Continue reading