lift has sat for a couple of months and will not click or make any noise now at all, the lift has not had a lot of use
Showing items 1 - 7 of 7 results.
I would also check the parking brake switch. They are know for the arm getting bent up.
contact your local clark parts dept and ask for the schematic for your machine.
I'm almost in the same boat. Mine sits or creeps and then takes off, jolting. I can see the double contact kick in and spark went it does move, but won't go over a 2 X 4. Theres a tm12 forum thats close to this problem.
I need to buy manual somewhere. Help Please
there is no seat switch i will check the foot brake switch and i am not sure on the ev100
the foot brake switch could be bad or seat/parking brake switch if it has them, i dont think it does. this is ev100 right?
the battery is charged and the forks do lift up and down just the forward and reverse do not work at all sorry i should have given you more info on that. the battery shows on the gauge that it has a good charge
is your battery charged? if the truck is sitting doing nothing it should not have a problem unless it did before it was parked. the battery can get damaged from this though.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.