WP3035-45 Cuts Out - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
WP3035-45 Cuts Out

Crown WP 3000 SERIES

Truck works fine, but while driving and turning cutting out. One side only. Suspect broken wiring. No codes present at time of cutting out. History nothing related. Checked tiller wiring and brake switches and wiring. Any other ides? Possible tests? Thanks.

Posted 13 Dec 2017 06:15
By Roadguy
joined 26 Jan'16 - 11 messages
Ontario, Canada

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Double check the switches when you have it turned where it cuts off a lot of times the handle gets slack and the switch don't make up when the handle is turned.

Posted 17 Dec 2017 09:14
By Zerk
joined 21 Apr'16 - 28 messages
Arkansas, United States

Post a Reply Report this post

Ok thanks. Will try.

Posted 14 Dec 2017 14:33
By Roadguy
joined 26 Jan'16 - 11 messages
Ontario, Canada

Post a Reply Report this post

Make sure the wires are secure on the connector pins, and the pins are seated in that connector. Raise the drive tire off of the ground and pull/push on the wires while in travel mode

Posted 14 Dec 2017 13:41
By Ifixit
joined 30 Jan'17 - 174 messages
Pennsylvania, United States

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.