Tcon/Scon calibration inconsistent. - Technical Troubleshooting discussion in Forkliftaction's forums

Genie SX-150:
Tcon/Scon calibration inconsistent.

Hello,
I have some troubles with the genie SX-150.
I've tried a lot bit it wont exist.
The machine is a genie sx-150
SN: SX15015H-147
Year : 2016
Software of the machine is:
Tcon : v1.10
Pcon : V2.11
Scon : V1.10

The problem is the machine gives some fault between : Tcon/Scon calibration inconsistent.
So the boom wont go up and don't want to extend ( also I won't drive ).
I did many times the calibration per manual instruction and it wont help.
Some times the fault leaves and after 2 hours I came back.
Ive I look at the parameters or run screen of the Tcon or Scon with Webgpi I don't see something strange.
Nothing strange with the angle sensors or length sensor.
any help?

Posted 20 Aug 2021 17:39
Discussion started by michaeldejong
Netherlands

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.