1. Home
  2. Forums
  3. Technical Troubleshooting

Still R20-15I:
Slow moving

Hello, I repaired the hydraulic block and after putting everything together--drives slow--without an error--there is 8,5volt goes to the motor only--the accelerator pedal shows ok.

Any help is welcome

Thanks
  • Posted 17 Dec 2019 04:58
  • Modified 17 Dec 2019 04:59 by poster
  • Discussion started by gr_defkalion
  • Greece
ath_syntiritis@yahoo.gr
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
Hi. When you repaired hydraulic block, you did not damaged the current sensor? As it is very easy to break by removing it
  • Posted 15 Jan 2020 19:24
  • Reply by Buitweedas
  • Lithuania
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

PREMIUM business

Noblelift
Global leader and manufacturer of high quality electric, lithium-ion, and IC material handling equipment.
Noblelift
From the forum discussions …
"Remove the coils and ohm out the pins. Coils take a different number than regular 4y plugs... If code is there then it is an ecu issue."
ron_k, United States
Read & Post in our Forums
Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Last Week's Most Read
edition #1227 - 24 April 2025
Forklift Diaries
Upcoming in the editorial calendar
ARTIFICAL INTELLIGENCE
May 2025
Ask us about editorial contribution
Forklift Diaries
From the forum discussions …
"JLG 2630ES:...These lifts pots can be a hassle...if you replaced them..make sure you changed wiring..they come set normally open..."
Matthew_Reed, United States
Read & Post in our Forums
Fact of the week
On average, people read 10-30% slower from a screen than from paper.