Resetting Maintenance Reminder Light - Technical Troubleshooting discussion in Forkliftaction's forums

Manitou M50-4:
Resetting Maintenance Reminder Light

The sequence in the book; depress accelerator pedal 15-20, let fully up for 15-20, then all the way down again for 15-20 seconds, fully up for 15-20 seconds, than half stroke down for 15-20 seconds is suppose to reset maintenance reminder. The book doesnt say do it with the keyswitch off, on accessory, on. Can anyone help?

Posted 17 Sep 2022 23:05
Discussion started by TCBOHL
Florida, United States

T.C. Bohl

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

The engine light is on?

Posted 18 Sep 2022 00:20
Reply by shlomi_r
hchf, Italy

sglffy

Post a Reply Report this post

Park brake had to be set, it was more like 17 seconds and the 1/2 throw in the manual was more like a 1/4 throw of the last sequence of reset procedure.

Posted 17 Sep 2022 23:27
Reply by TCBOHL
Florida, United States

T.C. Bohl

Post a Reply Report this post

Hi
Open the switch wait 10 sec
Press the pedal full 17 sec
Dont press 17 sec
Press full again 17 sec
Dont press 17 sec
Press half pedal 17 sec
Dont press and wait.
Shlomi7jd gmail.com
If engine light is on , you need pc service tool.
[email address removed]

Posted 17 Sep 2022 23:09
Modified 17 Sep 2022 23:11 by poster
Reply by shlomi_r
hchf, Italy

sglffy

Post a Reply Report this post

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.