Report this forum post

I would check the air flow meter connector it could have a broken wire , the insulation usually holds the broken wire together. You can order the connector and terminals from your Cat dealer. If you have problems with parts post that and I will find the number for you. You could check you fuel filter one is below the regulator under a cast aluminum cover. Depending on the year there are two possible locations for the last chance filter. If the elbow where L.P. enters the carb has screws, it is under it. If not look under the cover above the L.P. pressure sensor on the carb. The filter is a thin screen so be careful it is easy to damage. Post the serial number if you need more information. Good luck.
  • Posted 5 Feb 2017 10:28
  • By shovel_fx
  • joined 11 Mar'12 - 41 messages
  • Illinois, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Toyota 8FGC35U-BCS
Flesherton, Ontario, Canada
Used - Sale
SMV (Konecranes) 20-1200B
Balling, Denmark
Used - Sale
Upcoming industry events …
October 15-16, 2025 - Las Vegas, United States
November 12-13, 2025 - London, United Kingdom
November 13-14, 2025 - Berlin, Germany
Movers & Shakers
David Wells David Wells
Chief executive, Logistics UK
National business development manager, Roadpod
Senior vice president, PEAC Solutions
Board director, UKMHA
Latest job alerts …
Erie, PA, United States
Sioux Falls, SD, United States
Atlanta Savannah Orlando Tampa Jacksonville West Palm, United States
Movers & Shakers
David Wells David Wells
Chief executive, Logistics UK
National business development manager, Roadpod
Senior vice president, PEAC Solutions
Board director, UKMHA
Toyota 8FGC35U-BCS
Flesherton, Ontario, Canada
Used - Sale
SMV (Konecranes) 20-1200B
Balling, Denmark
Used - Sale

Showcased in the Virtual Expo

Movers & Shakers
David Wells David Wells
Chief executive, Logistics UK
National business development manager, Roadpod
Senior vice president, PEAC Solutions
Board director, UKMHA