So im working on an EASI OPC30TT. Serial EASI-96-AJ1672.
Truck came in for no lift problem. Found the limit switch at fault. Went to replace switch and the wires actually came out of the connector. Im assuming the B+ and B- wires touched because now i have no power throught the truck.
Strobe light works and accessory lights work. Display does not come on, PC contactor does not close, and i have no power to any of the cards. I checked all the main power fuses and fuses located on power card. All test good.
I cant get the PC contactor to close.
Any ideas?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.