Report this forum post

Code 190-2 is a crank signal loss code. It does not have anything to do with the transmission. You may have a VSM problem with this truck. I would check the directional solenoids and see if you have anything going to the coils. If not I would check the wiring from the ECU to the VSM for the crank sensor and cam sensor. You may have wires shorted in the harness.
  • Posted 15 Apr 2016 22:56
  • By BREWSKI
  • joined 10 Jan'12 - 1,699 messages
  • Nebraska, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".