Entering the Primary Password
1. Press the power control and hour meter
select switches simultaneously (system
should respond with a short beep).
2. Within 10 seconds, press the UP arrow
(system should respond with a short beep).
3. Within 10 seconds, press the DOWN arrow
(system should respond with a short beep).
4. Within 10 seconds, press the UP and
DOWN arrows simultaneously and hold
them for 2 seconds (system should respond
with a short beep after 2 seconds).
Acceptance of the primary password will be
indicated by the word "PRIMARY appearing on
the display. If a switch is not pressed within the
10 second limit, the system will default back to
the self-diagnosis mode.
Analyzer (AnL) Mode
Analyzer mode is the error analysis mode. Both
primary and secondary passwords are required
to enter analyzer mode. Once the analyzer mode
is activated, the display will show "Analyzer".
Entering the Secondary Password
1. Enter the primary password.
2. Within 10 seconds, press the power control
select switch (system should respond with a
short beep).
3. Within 10 seconds, press the UP and
DOWN arrow switches simultaneously
(system should respond with a short beep).
"Analyzer" will appear on the display indicating
acceptance of the secondary password.
Entering Analyzer Mode
To enter Analyzer Mode, press the power control
switch. The 8-character display will display
"AnL" in the left most segments and the right
most segments will display "00". The left "0" will
be flashing. The left number is the category
number, the right number is the class number.