So our forklift was having problems starting. (Sometimes you would have to turn the key several times to get it to crank). So my boss had me change the starter so I took the old one off had it rebuilt and put it back on. No real problems there. That is, up until I go to start it. It wont start wont turn over but the headlights work, but the horn doesn't (I dont know if thats wired to the ignition). I have no paperwork on this thing so I'm not sure how it is wired if there is a fuse to check or anything so any guided advice would be appreciated
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.