On 26 May 2011 07:39 AM , [ketcamaro at gmail dot com] kevin_t
did scribble in crayon, upon this forum: as the "Pedal Dance" in thread number 6842.
Turn the ignition switch on with accel. pedal released,after 3 seconds fully depress the accel pedal 5 times within 5 seconds(end in released position). After 7 seconds(timing is very important...1 mississippi 2 mississippi etc....) press and hold down accel pedal for approximately 10 seconds(again timing) until the hour meter starts blinking, release pedal and push down and hold again for 10 seconds) hour meter should be on with no codes showing,shut key off and test to see if codes cleared.

Re-posted here to prevent disappearance and 'ease of searching'.