I was thinking that it may be in the forward clutchpack.But I dont understand why rev.is acting the way it is,now. since I only pulled the forward valve.Rev. hasnt been removed,only solnoid changed.Does the holding pin, for the forward valve postion in the outer cylinder of the valve assemble,or go into the inner part.It is in the small hole [same size as pin].Can the inner parts be turned,or the valve its self, Be put in upside down?Im thinking, its a problem with the forward valve.Something Im missing. The valve itself is fairly simple,as far as reassembling it.Im pretty sure its put together right.I dont believe the parts,If assembled wrong would fit back together.[forklit] I may be interested In that valve if you can find it.Thanks so much,Kent