Hi
Try to do and check one of the posibilities below:
- Canbus system : R between Can L and H = 60 Ohm, Canbus power supply = 24 VDC/ 12 VDC, Voltage Can H and GND ~ 2.7VDC, and Can L and GND ~ 2.3VDC; Can H and Can L must be insulated from the GND system.
- Either FPS or Travel/Pump power module is defective or no power supply.
Hope it help
Rgds
Nuna
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.