Those parameter settings are fine.
Wire number 98 in connector X131 position 36 in the plug is the warning lamp output from the A5 MCU under the floor with the pedals on.
The warning lamp is P5 - you had the plastic roof panel down & checked its been connected to the right socket in the roof?
From on top of the roof using a 4mm allen key & torx 20 screwdriver, first remove the silver panel on the left ( 2 allen key bolts ) then undo the torx 20 screws while you support the plastic roof panel, the plastic panel will drop down & allow you to get at the connectors, the connectors will be numbered.
Also what software package is it running?
260038 - ****, whats the **** part of the package number?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.