I had a problem w/ this truck in Jan., would not start. Fuel system (impco, JB-2) no good. Replaced everything from reggo coupler to low pressure fuel line to carb. ((Found the original converter (steel reed w/ rubber square inside) bent and rubber broken)).
Truck ran great for 2 months, again a complaint the truck wont start, replaced the convertor, opened the old convertor, found the steel reed bent and broken.
OK, maybe a fluke, changed the convertor again, got a call last nite, same problem, possible convertor.
If it is the convertor, whats causing these model J's to fail after 2 months. The truck is not running hot to my knowledge, maybe poor coolant flow?
Any suggestions?, thanks.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.