Report this forum post

Looking for some sugestions on this unit. Have replaced thermostat, water pump, radiator, all hoses. Pulled head and checked for any restrictions or blockage. none to be found. Have checked the valves, timming and inching pedal for proper adjustments. This unit will run about 30 to 45 min. and peg the temp gauge. running at a temp of 230 F. Also replaced the fan with a high flow fan and a smaller dia. pulley, all parts put on this unit are nissan parts. Unit has good circulation through radiator. Transmission fluid temp is runing at 230 F also. Any sugestions anyone Thanks.
  • Posted 20 Apr 2012 10:15
  • By GregM
  • joined 2 Apr'12 - 26 messages
  • Texas, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field

PREMIUM business

VETTER Industrie GmbH
The world's most comprehensive range of forks and the most intelligent sensor fork for more safety and efficiency.
Movers & Shakers
Rob Ott Rob Ott
Executive vice president and chief commercial officer, East Penn Manufacturing
President, Logistics UK
Director of dealer development East Coast, Big Joe Forklifts
Vice president, customer, TVH Americas