Seeking info on what needs to be modified in order to connect attachment hoses to the 4 Auxillary hydraulic lines that are secured in a fixed bracket welded to the class II carriage, pointing directly face down, the caps on the ends of the crimped on hose fitings are directly over the Class II lower bar of the carriage, not allowing for the addition of 90 degree fittings or steel lines. The Lift chains are directly behind the 4 hoses, Chain anchors just below the back side, tried to raise hoses in the brackets, still no clearance, Anyone know if Yale has a kit out for Class II applications? Any service bulletins? problem seems to exsist on class II carriage. Appreciate any input. I have contacted NAACO, but no reply yet.