ayep
check the relaybox
note the color of the relays
if thier black, replace them, black is the old style and they have been updated since to a green color.
try kevin's suggestion and swap them around (pay close attention to where the EGI relays are) and swap those out with ones from 2 of the other slots.
see if this changes anything

if this has no effect then look at the VCM/ECM connectors and also the ground on frame just behind the ECM box(should have 2 or 3 wires from the harness with large ring terminals). Remove the bolt and make sure there is NO paint on the frame, scrape it off to make a clean connection.

hope this was helpful, good luck!