Hello all
glad I was able to find this site!! and I hope that some one here can steer me in the right direction. I currently working on a catterpillar D35V and I am rebuilding the peugeot motor (I know this is not a great motor but the price was right) I was lucky enough to find some one that had some spare parts laying around so I was able to put freash cam and crank bearings in and a full set of pistons and the shims under each cylinder. I also set the height to.005. And I was able to get the thicker head casket and find the torque specs I think. So the part I'm stuck at is the cam and crank timing marks to set static timing. The distributer is bolted down in a fixed position. the motor is a peugeot xn1p and runs on lpg. Any and all help would be greatly appreciated.
Also if any one a has a manual on the motor or lift would be great also.
P.S. If there is any tips or suggestions on this or any thing else on this lift I am all ears