i have a toyota 7fgcu25 serial# 01904. it wont start there is no voltage going to the top or bottom of the lp regulator.
if i start the forklift with carb cleaner then slowly open the propane valve. the lift will run with a the twc warning light on.
it will run until i shut it off. then wont start again.
i have read through all the threads on here and checked the things mentioned in prior posts.
can anyone help me with some suggestions.or better yet recommend a good reasonable forklift mech in houston texas.
[email address removed]
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.