Report this forum post

It acts like it wants to hit on the first spray of starting fluid but does not. I'm attaching pictures of the crank and cam sensors I just took off. I just want to confirm the connectors are plugged in correctly.

I am getting several lights on the dash when the key is turned in the on position. Neutral Green lights up, a circle with in exclamation mark in the middle with parentheses right above the neutral green lights up, an exclamation mark lights up, the battery indicator lights up, and the coolant/temperature indicator lights up.

Not sure how I can upload pictures on here, it doesn't show me where I can. I'll try to figure that out so I can add pictures.

The crank sensor that points downward I have the green connector plugged in and the cam sensor that points inward I have the black connector plugged into it.

Here's the icloud link that I have for the 4 pictures of the cam sensors, dash pictured (clear plastic was faded and I had to scrape away the yellowing), and the connectors. The black sensor (downwards) I had in the crank sensor spot and the grey sensor (inwards) I had in the cam sensor spot.

https://www.icloud.com/photos/#/icloudlinks/0989iADlzhpxVvTGv71DBnM8Q
  • Posted 23 Apr 2025 07:26
  • Modified 23 Apr 2025 07:33 by poster
  • By Aquilon
  • joined 17 Apr'25 - 13 messages
  • Georgia, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field

Showcased in the Virtual Expo

XQ360 with SLAMXQ by Collective Intelligence Group
XQ360 with SLAMXQ
Collective Intelligence Group
Upcoming in the editorial calendar
MANAGING MIXED FLEETS
Oct 2025
ASSET FINANCE
Nov 2025
Movers & Shakers
Rob Ott Rob Ott
Executive vice president and chief commercial officer, East Penn Manufacturing
President, Logistics UK
Director of dealer development East Coast, Big Joe Forklifts
Vice president, customer, TVH Americas