Eknoz,
From start on the key switch to the controller should be Black wire w/ white stripe. From controller to start relay it is a white wire w/ black stripe. Another connection is battery voltage from a 20-amp fuse and the other is ground. The anti-start controller is only for the start relay. If the starter is cranking the engine, it should be good. Try spraying a little brake clean in the air filter and see if the engine hits as soon as you crank. If so, then you have a fuel issue. If not suspect a failing connection. Good Luck.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.