Having an issue with a counterbalance RC5540-40. When the unit is turned on Access 1 goes through start up. The line contactor does not close, and unit gives an Event Code 305. I have checked the dead man switch and can see it changing states in the analyzer menu of Access 1. I have checked the wires to and from the Line contactor coil and Access 3, no issue there. the pump contactor will engage and have hydraulic functions just no travel functions. To some the issue up wrench light code 305 no travel, any assistance would be appreciated.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.