Report this forum post

Rich,

Code 676-4 is for glow plug relay OORL. Yes, the power comes out of the VSM under right side of dash. The negative side of the relay comes from battery negative. Since you had to jump start lift, may have damaged VSM. Use another ground to verify positive is not at relay. Also, 12 volts are sent for only a short time. Need to make sure all connections are complete for testing before turning on switch. Need to verify that the solenoid has 12 volts coming from starter. There is a fuse in between. Make sure all fuses are good. The factory says to remove battery and charge, do not jump. You can remove kick panel and check all connections at the VSM. Verify there is no corrosion at any of the pins or sockets. Also, the other code is for missing horn. Good Luck
  • Posted 5 Dec 2023 03:59
  • Modified 5 Dec 2023 04:00 by poster
  • By Fishmech
  • joined 12 Jul'17 - 370 messages
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Global Industry News
edition #1252 - 16 October 2025
In this week’s Forkliftaction News , we report on the GEP Global Supply Chain Volatility Index which shows Asian supply chains are at their busiest since June 2022 while the US and Europe’s supply chains remain under-utilised. One of the report authors describes the situation as being “as stable as it’s going to get”... Continue reading