Report this forum post

Without knowing what the computer is seeing it's all a guess. The petal dance takes time to get right unless the petal is bad and then it would never work this sounds funny but l will try to help you to go through the petal first turn the key on then count in your head 1 Mississippi 2 Mississippi 3 Mississippi after the last Mississippi push the petal down 5times within 5seconds make sure the last time you are in the up position take your foot off the petal and count 7seconds just like you did in the beginning than hold the petal down until it blinks and start counting it should start after Ten seconds of it does not work turn key off and start over it takes practice also if you get it if it blinks ten times in a row that counts as a zero all the codes are four digits at end of the codes it will blink ten in a row three times if there are no codes try again and get back to me good luck
  • Posted 17 Jun 2023 11:07
  • By Scott_
  • joined 16 May'21 - 313 messages
  • Pennsylvania, United States
Scott

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Upcoming industry events …
October 29-31, 2025 - Marina Bay Sands, Singapore
March 10-12, 2026 - Hong Kong, Hong Kong
Latest job alerts …
Tampa/Orlando Florida, United States
Dallas, TX or Lexington, KY, United States
Global Industry News
edition #1245 - 28 August 2025
In this week’s Forkliftaction News , we look at MHEDA’s Q3 Economic Advisory Report which reveals current resilience in the US materials handling sector... Continue reading
Upcoming in the editorial calendar
MANAGING MIXED FLEETS
Oct 2025
ASSET FINANCE
Nov 2025
Global Industry News
edition #1245 - 28 August 2025
In this week’s Forkliftaction News , we look at MHEDA’s Q3 Economic Advisory Report which reveals current resilience in the US materials handling sector... Continue reading
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA