Thanks for the reply!

-Yes it mounts in the dash.
-Yes it has the 3 pin triangle connector under the dash.
-Maybe the year is not correct. Just went by what the guy told me.

SN: F807N05205E

So I went ahead and bought a CANBUS to USB device from Ebay, it came with the triangle connector. Loaded the drivers, set up the connection in the app on the PC. Ran a test with the app that came with the unit. Sent some radon data, while the unit was NOT connected to anything. The LED lights came on so I assume it "works".

I got my hands on a Yale PC tool 4.88. When I try and connect the lift to the PC it will not connect. My CANBUS unit is listed in the drop-down for Vendor and Device. But no matter what Unit Code I select it will not connect.

So I found out the 207 is "lift disabled". I wanted the CANBUS to access the battery setting and see the password for the in-dash programming. Searched the web high and low to get the OEM default pass for the dash. Turns out it is 55555. So I turned off the 207 in the settings.

But now, I still do not comprehend the Battery setting. And I cannot find ANY info on it anywhere. And I still have no connection via CANBUS.

Please let me know if you have any advice for me on this!